Minus 80 Degree Deep Freezer

Enquire Now
SKU: WDDF-80 Category:

The Plasma Freezer provides an optimal extremely cold temperature for plasma and test samples conservation. The instrument’s exterior body is composed of heavy gauge hardened steel that has been powder coated, and the inner chamber is built of stainless steel (304). This unit is designed to maintain a stable and uniform temperature of up to -80.0°C in both vertical and horizontal configurations, and comes in four different sizes. A built-in stainless steel insulated inner door is included in the user-friendly design, and simple calibration is accessible via the control panel. This, combined with a visual and audible alert system, guarantees that your samples are not only safe but also accessible when you need them.

SPECIFICATION

Net Capacity (L): 400 ltrs. Insulation (mm): Door insulation- 125 mm thick PUF insulated with rubber gasket sealing, Cabinet insulation125 mm thickPUF insulation. Temperature range ((0C): (-)80°C to -50°C Temperature setting accuracy: 0, 1° C Max. ambient temperature ((0C): + 220 C Type of cooling: Evaporator tubing is routed through the outside surface of the inner stainless steel Power Supply (V): Input Volt- 230±10%V, 50 HZ, Single Phase AC Frequency (Hz): 50 Power consumption, KW: 3200 W Noise level; (DBA): <55 No. of compressors: 2 Alarm indications primary compressor on LED/ LCD indication Castors: Four nos. heavy duty front lockable/ rear non-lockable imported castor wheel. Chart Recorder: 7 days chart recorder with 3°C resolution is compulsory with range of 100°C to +50°C Shelves (pcs): 4 fixed interior trays Lock: Yes Interior Material: Interior cabinet material 1mm thick/ 20swg Exterior Materials: Outer cabinet materials 1.2 mm thick/18 swg power coated steel Refrigerant: Primary compressor> R404a (CFC free); RefrigerantSecondary compressor> R508b (CFC free) EUCE certified/CDSCO certified Other Specifications: 24 hours battery backup for display; The compressor should be automatically regulated according to the freezer load; The pressure sensitive mechanism used should protect the compressor in the long run; Triple rubber gasket sealing and handle with self pushing mechanism should keep the plasma products completely protected in the freezer. Alarms & Indications:- Alarm indications primary compressor on LED/ LCD indication COMP ON will be ON; High/Low temp.- Audio/visual;’ Door open- Audio/visual; Power Onvisual; Power fail- visual; Display resolution controller0.1°C; Chart resolution 3°C- method of recording ink pen on paper; Temp. sensing method- RTD sensor placed in a stainless steel bracket fitted at the left side of the second compartment from the bottom side; Insulation of suction linepolyurethane tubing; Total storage capacity-80 bags x 5 compartments- 400 regular plasma bags. Warranty: 3 Years

Reviews

There are no reviews yet.

Be the first to review “Minus 80 Degree Deep Freezer”

Your email address will not be published. Required fields are marked *

Distributors Guide