SPECIFICATION
Automatic Coversliper
WACS-2020A+ LSSM-2020AN Slide Stainer and cover slipper combination system is an all-in-one solution for heating, dewaxing, hydration, staining,
dehydration, transparency and cover slipping for routine histology, rapid frozen sectioning, cytology and special staining
High efficiency: Horizontal feeding, short stroke, simple movement, fragment free, no missed slide.
Large capacity: The storage system is discs designed, which can store 12 racks of 240slides, making it truly unattended.
Low cost: No special consumables, all consumables are open, intelligent water saving, auto opening/closing of water valve according to equipment operation.
Covering speed:800 slides/hour
Slide rack capacity: 20 slides/rack
Automatic Slide Stainer
High speed: Loaded with multi-threaded intelligent ask scheduling under the ARM core, the Slide Stainer and the Coverslipper are directly connected, fast
operation and simple structure.
High throughput: 32 stations freely set, 60 slides per tank capacity, continuous loading; 600 slides per hour, multiple staining modes simultaneously.
ARS Intelligent Staining System: It can adjust the staining time according to the times of reagent is used and the ambient temperature Ensure the staining
result.
Color touch screen: The Slide Stainer is equipped with 12.1 inch color touch screen, which can be rotated at any angle, with English operation interface.
Multi-functional reagent tank: Three rows of reagent tanks + one row of multi-functional tanks design, up to 28 reagent stations.
Electrical requirements/power 100- 120 V~ 6A 50/60 H Fuses: 2 x T6AL 250
Inlet voltage setting: 230 V Networking/LIS connection LAN: Preferably with DHCP server Cable: Minimum CAT-5 patch cable, maximum length: 3 to 5 m
(10 to 15 ft)
Xternal ventilation 4″ (110 mm) duct Airflow range: 80- 140 m3 /h required (47-82 ft³/min) Waste/drain Sink or drain within 2 m (6.6 ft) Two to three
separate waste containers (10 L each) One waste which empties automatically (10 L) One to two hazardous waste, manually emptied, if required (10 L)
Environmental conditions Stainer must be used indoors and the work area for Stainer must be an environment with an ambient temperature between 16-26 °C
(65-79 °F) and 25-60% RH.
Water supply Pressure range: 0.2 – 0.6 MPa Connection to tap water ¾” thread tap reagent bottles • 36 to 40 dip tanks with distribution plates • Three rack
holders • User Guide • 1,000 to 1,200 Cover Glasses
Heating chamber capacity 15 racks at a time, maximum 120 to 150 slides Heating chamber temperature Minimum 50 °C and maximum 70 °C (122-158 °F).
Reagent bottles • 36 to 40 dip tanks with distribution plates • Three rack holders • User Guide • 1,000 to 1,200 Cover Glasses
Heating chamber capacity 15 racks at a time, maximum 120 to 150 slides Heating chamber temperature Minimum 50 °C and maximum 70 °C (122-158 °F)
120- 130 slides waiting in exit bath before coverslipping
Reagent capacity Stainer reagents (Hemato xylins, Eosins, Differentiation Solution and Bluing Buffer) or user-defined reagents.
” Protocols 20 protocols of which 19 can be programmed by the user It is possible to change number of steps, reagents, and time in the protocols Each rack can
be loaded with any of the 20 protocols as needed Three validated, pre- optimized protocols for both progressive and regressive staining”
“Alarms Alarm notification when protocol is completed Alarm notification, if error occurs (screen error message pops up)”
Cover glass size 24 x 50 mm
Mounting medium Stainer is validated with Xylene Free Mounting Medium. Programming of mounting parameters Placement of both cover glass and amount of mounting medium applied to each slide can be programmed.
Dimension : 650mm*650mm*750mm + 1230MM*800MM*750MM
Reviews
There are no reviews yet.